[accordions] [accordion title=”CEMENTATION AND GROUTING“]
[accordion title=”DECONTAMINATION CLEANING“]
[accordion title=”HANDLING” active=”yes”]
[accordion title=”VOLUME REDUCTION“]
[accordion title=”TRANSPORT ADR“]
Equipments NUSPIDER and NUSPREADER are for straight container: CMF, CMT,CMB, CE2b and CE2a types.
NUSIM has wide experience in design and manufacturing of straight container handlers of any size.
The most common straight containers are for the radioactive waste solidification of 350 liters CMF, 1.300 liters CMT, 1.500 liters CMB, 2.900 liters CE2b and 7.200liters CE2a. With which it can also be handled structural cages CJE-V for the whole 8 drums movement.
The dimension of CMF and CMT containers enable its storage into the immediately above in case of radiological requirements.
The equipments made by NUSIM allowto introduce small drums into the next size ones.The equipments are also designed to the assembly of facilities and to carry out new operations without releasing the first one.
The container handling equipments are called NUSPIDER and NUSPREADER, its code is completed with the references to optional features that raised implementation requires.
Common available options:
– Motorized continuous or pulsing rotation
– Motorized drum´s diameter changeover
– Automatic working diameter selection
– Handling and capping of the drum
– Weight control
– Zenithal visualization camera
– Radio Frequency Control
– Battery Operated
– Adapted to outdoors operations
– Stainless steel manufacturing
– Crane hook swing lock
– “Plug &play” supply, withoutinstallation
NUSPIDER equipments allow to handle packages with the highest levels of security and redundancy required by the Regulatory Authority for handling radioactive hung packages.
The main handling securities:
– Impossibility of loosening the drum while under suspension.
– Impossibility of releasing the drum if it is not seated correctly.
– Passive gripping system, whereby power is not needed to grip a drum.
– Keeping the drum hanged with the highest levels of security in case of power failure.
– Redundant systems that allow manual release of the package in case of failure.
– High Safety factor.
[one_third] Container handling
[button icon=”article” url=”http://nusim.com/wp-content/uploads/2012/09/Manipulación-de-contenedores1.pdf” target=”_blank”] Download PDF [/button]
IMAGE GALLERY – CONTAINERS
→ Tapado CE2 – Container
→ Tapado CMT
[button icon=”article” url=”http://nusim.com/wp-content/uploads/2012/09/PINZA-NUSCMT-AUTO-AJUSTABLE.pdf” target=”_blank”] Download PDF [/button]
auto ajustable 3500
[button icon=”article” url=”http://nusim.com/wp-content/uploads/2012/09/PINZA-NUSCMT-AUTO-AJUSTABLE-3500.pdf” target=”_blank”] Download PDF [/button]
de regulación manual
NUSPRADER – Manipulador
→ Tapado CE2 – Container
→ Capping and dose rate measurement of CMT
The manipulation and storage equipments for CMT container´s cap, as well as for the shielding, during the manual capping of the package.
NUSIM has developed an equipment to facilitate the capping process and the CMT packages characterization, in high production plants or in where protective measures are required to be implemented by ALARA criteria.
For this purpose, these three equipments were created:
– The cap handling for CMT containers
– The turner and accumulator of CMT container´s cap
– The sealing cabinet for dose rate measure and package sealing
The cap manipulator is a sealing device with the following characteristics:
– Automatic grip attachment to NUSPIDER or NUSCMT. It could also be manipulated with sling chain.
– Allowing automatic remove of overlapped caps of new arrival empty CMT.
– Allowing the transportation of caps to the turner cap´s accumulator.
– Allowsautomatic capremove of turner accumulator after puttingthe siliconesealing.
– Allows aligning and coupling cap with silicone over the filling CMT and provided in sealing cabinet.
– Allows the sealing of the package and protects operator during manual capping process.
– Isolates the package of the background during the dose rate of 12 points.
The turner accumulator of caps is an implement with the following functions:
-Collect automaticallynew capsthat bringsthe manipulatorofcaps.
-Assistingthe operatorto the manuallyprocess of caps turning.
-Caps storage till it is needed.
-Placethe capsverticallyin an ergonomic positionto facilitate the application workof siliconesealing.
-puttingthe sealed siliconewith no need to approach the package.
– Provide automatically caps with the silicone to the caps manipulator
Thesealing cabinet is an element withthe following features:
– Host the twelve probes for dose rate measuring specified for the package
– Protectsthe probesduring theinsertion process from CMT with a clamp NUSCMT or with the conglomerates
– Automatically, places CMT containerat specified distance for the proper functioningof the probes
– Shields the packageand protects the operatorduring the manual tightening process
– Isolate the bulk of thebackgroundduring the dose rate measurement of 12 points
[one_third] Dose and capping
of CMT containers
[button icon=”article” url=”http://nusim.com/wp-content/uploads/2012/09/Tasa-y-tapado-contenedores-CMT2.pdf” target=”_blank”] Download PDF [/button]